Categories: Android Downloads

Official Samsung Galaxy S7 USA Stock ROM Firmware Download

download official samsung galaxy s7 & s7 edge with stock rom (usa)

if you are looking to download the stock rom firmware for your mobile carrier-specific samsung galaxy s7 and s7 edge you have come to the right place. your only option after failing to root (bricking) your phone is to flash it with the stock rom in order to return the device to a healthy state. mobile carriers wont provide you with the stock rom firmware so there are various websites out there that claim to supply real downloads, but are actually just click bait sites collecting advertisement and click-based revenue. the people who created those diarrhea sites will have a nice reservation in hell .

warning!
please use the following information and files at your own risk!

the step-by-step instructions are below the download links table.

modelversionfilenamecarrierdownload
galaxy s7 sm-g930a6.0.1g930aatt1apb5_cl7193387_user_binary.zipat&t AT&T S7 G930AATT1APB5 (664 downloads)
galaxy s7 edge sm- sm-g935a6.0.1g935aucu1apb5_cl7193387_user_binary.zipat&t AT&T S7 Edge SM-G935A (514 downloads)
galaxy s7 sm-g930v6.0.1g930vvrs4aph1_g930vvzw4aph1_vzw.zipverizon VERIZON S7 SM-G930V (668 downloads)
galaxy s7 edge sm-sm-g935v6.0.1g935vvzw1apb1_cl7042442.zipverizon VERIZON S7 EDGE SM-G935V (409 downloads)
galaxy s7 sm-g930p6.0.1spr-g930pvpu1apb5-20160314204610.zipsprint SPRINT S7 SM-G930P (273 downloads)
galaxy s7 edge sm-g935p6.0.1g935pucu1apb5_cl7193387.zipsprintnot available
galaxy s7 edge sm-g935t6.0.1g935tuvs2apb8_g935ttmb2apb8_ tmb.zipt-mobile T-MOBILE S7 EDGE SM-G935T (350 downloads)
galaxy s7 edge sm-g930t6.0.1g930tuvs2apb8_g935ttmb2apb8_ tmb.zipt-mobilenot available
if you have found this site helpful, please consider throwing me a tiny bit of bitcoin. any amount is appreciated.
39xkg2rjfzx5brgh7yzvfzoy5yywk7jmev or use the qr code below if you have found this post helpful.

rom flashing instructions:

download the stock rom for your phone in the table above (zip files consists of bp, ap, cp, csc. ums/home)

  1. download and install samsung kies 3 for windows or mac
  2. download and install odin_v3.12.3.zip (or visit the official odin flash tool all versions download link with guide)
  3. turn off the device
  4. press and hold the volume down + home + power buttons simultaneously for 5-8 seconds until you see the warning sign
  5. press volume up and then connect device to computer
  6. next, check the “auto reboot” and “f. reset time” options in odin tool

    important: do not put .pit file and do not tick repartition

  7. if your rom is a single .tar.md5 package click on the ap/pda button and browse to the .tar or .tar.md5 file that you extracted in previous step and select it
  8. if the package has more than one tar archive then they will be labelled with pda/code, phone/modem and csc. just put them in the corresponding section of odin like below:
    bl = bootloader
    ap = pda (code)
    cp = phone (modem)
    csc = locale

  9. done

you don’t need to perform a hard reset but figured i should include the instructions just in case.

hard reset instructions:

  1. ensure the device is powered off.
  2. press and hold the volume up and home buttons.
  3. while continuing to hold the home and volume up buttons, press and hold the power button until “recovery booting” appears in the upper left then release all buttons.
  4. select wipe data/factory reset.
    utilize the volume up/down buttons to highlight and the power button to select.
  5. select yes.
    utilize the volume up/down buttons to highlight and the power button to select.
    allow several seconds for the factory data reset to complete.
  6. select reboot system now.
    allow several minutes for the reboot process to complete.
    to set up the device after the reset has completed, refer to initial activation and setup.

 

leave a comment if you find any broken links.

Share
Disqus Comments Loading...

Recent Posts

FreeNAS Error Creating Pool

command '('gpart', 'create', '-s', 'gpt', '/dev/da8')' returned non-zero exit status 1. If you get this error while trying to create… Read More

May 14, 2019 8:22 am 08:22

Change Grub Default Boot Entry on Linux Mint

i'm dual booting windows and linux mint on my laptop. the grub default is to boot into linux mint, however… Read More

April 23, 2019 7:45 pm 19:45

How to Reset Secure Channel On Active Directory Domain Controller

when you're a little too careless about virtualizing your domain controllers, cloning, migrating, backing up and restoring, returning from vacation… Read More

April 21, 2019 8:14 am 08:14

Run SystemD Script Before System Shutdown

for the sheer hell of it, a few weeks ago i wanted to see if i could properly and successfully… Read More

April 20, 2019 10:14 am 10:14

Learn Systemctl Usage to Manage Systemd Service in Linux

systemd is new service manager for linux. it's a replacement for all previous init systems (sysv/sysvinit & ubuntu's upstart) and… Read More

April 20, 2019 7:55 am 07:55

Force Delete Windows Server DHCP Failover Relationship

if you've found yourself here then chances are you messed up one of your domain controllers or at least one… Read More

April 20, 2019 5:54 am 05:54